Search Site

TENEX INC. - GUNSMITHING SERVICES



GUNSMITHING LABOR:

1) SHOP LABOR: $75 PER HOUR - $45 MINIMUM
2) MACHINE LABOR: $120 HOUR - $75 MINIMUM
3) RESEARCH LABOR & PARTS FINDING: $25 PER HOUR - $5 MINIMUM

GENERAL WORK:

1) FIREARM CLEANING & LUBRICATION: $49
2) WRITTEN FIREARM APPRAISAL: $45 EACH ITEM
3) CHECK HEADSPACE OF FIREARM: $45
4) REMOVE FIRED CASE FROM CHAMBER: $60
5) REMOVE LIVE ROUND FROM CHAMBER: $65
6) MAKE A CHAMBER CAST: $105
7) LIVE-FIRE SIGHT IN RIFLE/SCOPE: $85 + AMMO
8) DIAGNOSIS OF FIREARM PROBLEM : $65

SIGHT INSTALLATION:

1) INSTALL GLOCK SIGHTS: $20 + PARTS
2) INSTALL 1911 SIGHTS: $65 +PARTS (ASSUMES NO MACHINING)
3) INSTALL KAHR SIGHTS: $75 + PARTS (FACTORY CUT OFF-PRESSED ON)
4) INSTALL M&P/H&K/SIG/WALTHER/OTHER: $45 + PARTS
5) MILL FOR OPTIC ON PISTOL: $195 ( GLOCK ) - $175 ALL ELSE

RIFLE WORK:

1) LAP SCOPE RINGS: $75
2) LIVE-FIRE SIGHT IN RIFLE/SCOPE: $85 + AMMO
3) BOLT ACTION TRUING/BLUEPRINTING : $375
4) OVERSIZE BOLT KNOB INSTALLED: $115 +KNOB COST
5) THREAD MUZZLE FOR SUPPRESSOR: $135 (Refinish additional)
6) INSTALL/CHAMBER BARREL: $395 (Barrel additional)
7) MACHINE INSTALL MUZZLE BRAKE : $195 (Tapered/Blended to barrel) Refinish additional.
8) INSTALL MUZZLE BRAKE : $115 (Timed includes shims) + BRAKE
9) DRILL & TAP FOR SCOPE: $49 (Per hole)
10) STOCK BEDDING: $195
11) STOCK BEDDING WITH PILLARS: $285
12) STOCK INLETTING FOR BOTTOM METAL: $245
13) STOCK INLETTING FOR ACTION/BARREL: $245
14) FREE FLOAT STOCK: $135
15) INSTALL TRIGGER: $95 + TRIGGER
16) SMOOTH & ADJUST TRIGGER: $125 (ADJUST IF IT CAN BE ADJUSTED)
17) POLISH BOLT: $65
18) POLISH CHAMBER: $120
19) DRILL/PIN/WELD MUZZLE DEVICE: $125

SHOTGUN WORK:

1) DRILL & TAP FOR SIGHTS: $49 (Per hole)
2) INSTALL FRONT SIGHT BEAD ON RIBBED BARREL: $85 + SIGHT
3) CUT DOWN BARREL & THREAD FOR CHOKE: $185 (ASSUMES PROPER WALL THICKNESS)
4) INSTALL SLING SWIVEL: $75 EACH
5) INSTALL SHOT TUBE EXTENSION: $50 + PARTS
6) INSTALL OVERSIZED BOLT RELEASE: $85 + PARTS
7) INSTALL OVERSIZED BOLT HANDLE: $45 + PARTS
8) OPEN UP MAG-WELL FOR 3-GUN: $175 - REFINISHING EXTRA IF DESIRED

PISTOL WORK:

1) FIT SLIDE TO FRAME: $295 + PARTS
2) FIT BEAVERTAIL OR THUMB SAFETY: $95 + PARTS
3) FIT EXTENDED MAGAZINE RELEASE: $60 + PARTS
4) INSTALL & FIT EJECTOR: $85 + PARTS
5) INSTALL & FIT FIRING PIN AND PIN STOP: $85 + PARTS
6) HAND FIT BARREL: $185 + BARREL
7) FIT BARREL BUSHING: $145 + BUSHING
8) POLISH THROAT & FEED RAMP: $125
9) TRIGGER JOB: $165 + PARTS
10) LOWER & FLARE EJECTION PORT: $185
11) DRILL & TAP FOR SCOPE: $49 (Per Hole)
12) FIT NEW TRIGGER: $135 + PARTS
13) FIT NEW HAMMER: $105 + PARTS
14) DE -HORN ENTIRE PISTOL: $375 + REFINISHING
15) INSTALL NEW SIGHT DOVETAILS: $135
16) BOBTAIL FRAME: $185 + PARTS & REFINISHING

REVOLVER WORK

1) TRIGGER JOB : $165 + PARTS
2) CHAMFER CYLINDER: $150
3) BOB HAMMER: $115
4) REBARREL: $175 + PARTS & REFINISHING
5) DEHORN FIREARM: $375 + REFINISHING
6) SET TIMING: $160
7) INSTALL FRONT SIGHT: $75 + PARTS (If no machining required)
8) FIT/DRILL/TAP FOR SCOPE MOUNT: $49 (Per hole)

AR - SPECIFIC WORK:

1) INSTALL LOWER PARTS KIT IN STRIPPED LOWER: $65 + PARTS
2) INSTALL UPPER PARTS KIT IN STRIPPED UPPER: $50 + PARTS
3) INSTALL HANDGUARD ON UPPER: $65 + PARTS
4) INSTALL NEW BARREL: $65 + BARREL
5) INSTALL NEW GAS BLOCK: $45 + PARTS
6) INSTALL FURNITURE: $65 + PARTS
7) INSTALL/SET DROP IN TRIGGER: $50 + PARTS
8) INSTALL OTHER PARTS: $ HOURLY
9) FULLY ASSEMBLE CUSTOMER AR (ALL PARTS): $110 + PARTS

CERAKOTE WORK - Click Here

CNC Fiber Laser Engraving - Click Here